HOW TO MAKE NAIL ART
- A base coat to form the first coat on your nails
- A top coat to apply over the base coat
- Different and bright coloured nail polishes of your choice
- Black and white acrylic paints
- Nail art brushes or a thin brush to create nail art designs.
ü Steps :
a.
Apply
a base coat
b.
Now
apply 2 coats of each different coloured nail polish on your nails
c.
Let
them dry completely.
d.
Apply
a layer of quick dry topcoat as this will help in removing the acrylic paint
without disturbing the nail colour.
e.
Take
a white acrylic color and mix some water in it
f.
With
this mix, draw some spikes on your nails (this is marked as step 2 in the below
picture. Fill in the spikes as shown in step 3.)
g.
Finally
use a thin brush to outline the spikes with a black nail color (marked in the
image as step 4).
h.
Follow
this pattern on all your nails. You can be as creative as you can and create
different designs too. Here is how it will look once you have created and
filled in the spikes:
i.
Now
write some pop words inside the explosions like BOOM! WAH, BANG, Ka-Pow, CRASH!
Of course you can write any words of your choice.
j.
Randomly
place small white acrylic dots in the remaining area.
k.
Do
the clean up around the nails using water or a nail polish remover.
l.
Next,
apply a layer of top coat.
HOW TO PUT
IN CONTACT LENSES
1. Contact Lenses
2. The mirror
3. A Soap
4. A towel
5. A water
ü Steps :
1. Thoroughly wash and dry your hands
with soap and a clean towel.
2. Rinse your lens with solution to
remove any trace of debris. (If you’re using a new lens, or 1-DAY ACUVUE®
Brand Contact Lenses, simply take them out of the package, no solution is
needed)
3. Place the lens on the tip of your
index finger. Be sure the lens is correctly oriented by checking the inside–out
marker.
4. Use your other hand to hold your
upper eyelid so you won’t blink.
5. Pull down your lower eyelid with the
other fingers of your applying hand.
6. Look up at the ceiling and gently
place the lens on the lower part of your eye.
7. Slowly release your eyelid and close
your eye for a moment.
8. Blink several times to center the
lens. You’re all set.
9. If your lens feels uncomfortable,
remove it and inspect for damage or debris. If it’s damaged, discard it.
Otherwise, rinse with more solution and reapply.
HOW TO USE
MICROSCOPE
1. Hand lens
2. Tripod magnifier
3. Flowers
4. Fresh, hairy leaves
ü Steps :
1.
The
hand lens is an instrument for giving magnifications of from 5 to 20 times.
Look at one of the flowers with your unaided eyes.
2.
Now
use the hand lens to examine the same flower.
3.
List
all the details you can see now that were not clearly visible to your unaided
eye before.
4.
What
magnifications does the hand lens you are using give?
5.
Now
place a leaf beneath the tripod of your tripod magnifier and adjust the height
of the lens by screwing it up or down until the object is in focus.
6.
What
magnification is provided by the tripod magnifier you are using?
7.
What
details can you see about the leaf which were not clearly visible t your
unaided eye?
HOW TO PAINT THE WALLS
1.
The
Walls
2.
A
Paint the walls
3.
A
Sponge
4.
A
water
5.
A
paint brushes
6.
The
painter blue tape
ü Steps :
1. Clean
walls.
Remove dust, dirt, and grease spots (which can ruin a smooth
finish) with water, a little mild dishwashing detergent, and a cellulose
sponge. Rinse walls with clean water to remove the soap residue.
2. Tape the
trim, window, and doorframes
Be sure to use painter's blue tape, which can be applied up
to a week ahead. Remove tape immediately after painting, before the wall dries,
so you don't peel off any paint with it.
List all the details you can see now that were not clearly
visible to your unaided eye before.
3. Prime the
walls.
It's a common myth that walls that have been painted many
times don't need to be primed. In fact, primer helps maximize the sheen and
coverage of paint and gives the finish coat a more uniform appearance. Now
place a leaf beneath the tripod of your tripod magnifier and adjust the height
of the lens by screwing it up or down until the object is in focus.
4. Brush
where you can't roll.
Brush on paint around trim and in the corners of walls,
where your roller can't reach, with a two-inch angled brush. Extend out two to
three inches from windows, doors, and moldings.
5. Use the W
technique.
For efficiency, start in the corner of a wall and roll on a
three-by-three-foot W pattern, then fill it in without lifting the roller.
Continue in sections until you're finished. Paint one wall at a time.
6. Paint the
trim.
When the walls are completely dry, tape where the trim meets
the wall. Paint the moldings and the door and window frames with a two-inch
angled brush.
HOW TO BRUSH YOUR THEET
1. a toothbrush
2. a cup
3. toothpaste
4. water
5. a basin
ü Steps :
1. Put a little bit of toothpaste on
the toothbrush.
2. Put the toothbrush in your mouth and
brush up and down. Brush both the bottom and top layer of your teeth.
3. Spit the toothpaste out into the
basin.
4. Fill up a cup halfway with water and
use it to rinse your mouth out.
5. Wash your toothbrush and put it
away.
HOW TO WASH YOUR HAND
a) A Soap
b) A Towel
c) The water
ü Steps :
a) Wet hands with water
b) Apply enough soap and handwash to
cover all hand surfaces
c) Rub hands palm to palm
d) Right palm over the other hand with
interlaced fingers and vice versa
e) Palm to palm with fingers interlaced
f) Backs of fingers to opposing palms
with fingers interlocked
g) Rotational rubbing of left thumb
clasped in right palm and vice versa
h) Rotational rubbing, backwards and
forwards with clasped fingers of right hand in left palm and vice versa
i)
Rince
hands with water
j)
Dry
thoroughly with towel. Duration of procedure: At least 15 seconds
HOW TO USE PRINTER
a)
A
computer
b)
A
printer
c)
A
paper
ü Steps :
a) Make sure that your
printer is hooked up properly before using it. If this is a brand new printer
then it will go through a check and print out a test page for you. A lot of
different times you can just turn it on, you will hear the ink moving around.
Something might come up on the computer telling you that the printer is on and
working properly.
b)
Open the page you want to print. If you are on the Internet and
want to print something from there. All you have to do is go up to file, then
down to page set up. This will give you more printing options to choose from.
When you are done setting up the page you can verify you have the right printer
hooked up by clicking on "Printer" at the bottom. Once everything
looks good click on "OK" and now your page should print out.
c)
Open up a ".doc" file if that is where your page is that
you need to print. When you are ready to print go up to "File" and
"Print Setup". Again you can choose how you want your page to look,
and check and make sure the right printer is installed. If your page is set up
the way you like it you can just click on the printer icon on the tool bar or
go to "File" then "Print."
d)
Using a printer a lot over time will start to wear down your ink
supply. Some models of printers let you know when your ink supply is getting
low. If you have an older printer you will just have to go by what the printed
page looks like. If it is very worn and faded then it is time to install a new
ink cartridge.
HOW TO MAKE
A CHEESE OMELET
 |
o Ingredients:
1) 1 egg
2) 50 g cheese
3) ¼ cup milk
4) 3 tablespoons cooking
5) Oil
6) a pinch of salt and pepper.
o Utensils :
1) Frying pan
2) Fork
3) Spatula
4) cheese grater
5) bowl
6) plate.
o Steps :
1) Crack an egg into a bowl
2) Whisk the egg with a fork until it
is smooth
3) Add milk and whisk well
4) Grate the cheese into the bowl and
stir
5) Heat the oil in a frying pan
6) Pour the mixture into the frying pan
7) Turn the omelet with a spatula when
it browns
8) Cook both sides
9) Place on a plate; season with salt
and pepper
10) Eat while warm.
HOW TO POLISH
SHOES
* Newspaper
* A shoe brush
* Clean rags
* Shoe polish that matches your shoes
* And a lighter or matches
* A mild cleanser, like saddle soap
* And a shoebox
ü Steps :
1) Put down some newspaper where you are going to work.
2)
Take
out the laces and use the shoe brush to remove any dirt from the exterior of
your shoes.
3)
Wipe
down your shoes with a damp clean cloth to make sure they're clean.
4)
Open
a canister of shoe polish.
5)
Wrap
a clean rag around your index and middle fingers, making sure that the rag is
tight against the pads of your fingertips.
6)
Dip
your rag-covered fingertips into the shoe polish and apply them to your shoe
with a circular motion, about one to two inches in diameter.
7)
Spit
on your shoe where you've just applied polish.
8)
Rub
the polish into your shoe with your rag-coated fingers, moving them in a
circular motion.
9)
As
you rub the polish, you will notice “swirls” appearing in the polished areas.
10)
Apply,
wet, and rub the polish on all the other leather areas, until the whole shoe
has had a layer of polish applied.
11)
Add
more layers of polish to your shoe, each time using less polish, until your
shoes are mirror shiny.
12)
Brush
the shoe very lightly with the shoe brush to bring out the best shine.
13) Re-lace the shoes and let them dry
in a cool room or a sho.
HOW TO MAKE
CUPCAKES
·
3 cups all-purpose flour
·
1 tablespoon baking powder
·
1/2 teaspoon salt
·
8 ounces (2 sticks) unsalted butter
·
2 cups sugar
·
4 large eggs
·
Finely grated zest of 1 orange
·
1 cup milk
·
8 ounces cream cheese (not whipped)
·
4 tablespoons unsalted butter
·
3/4 cup confectioners' sugar
·
1 tablespoon milk
·
1 teaspoon pure vanilla extract
o Steps :
1)
Preheat oven to 350 degrees with
racks in top and bottom thirds. Line twenty-four muffin cups (1-cup capacity)
with paper or foil liners, and set aside. Whisk together flour, baking powder,
and salt in a medium bowl, and set aside.
2)
Combine butter and sugar in a large
bowl; beat until pale and fluffy, about 2 minutes. Add eggs one at a time,
mixing well after each addition. Add orange zest. Beat in flour mixture and
milk in three alternating batches, beginning and ending with flour mixture.
After each addition, beat until just combined, scraping down sides and bottom
of bowl as necessary.
3)
Fill prepared muffin cups with about
1/4 cup batter. Bake, rotating pans once, until cupcakes are just golden brown
and spring back to the touch, 18 to 20 minutes. Let cupcakes cool in tins,
about 5 minutes, then turn them out onto wire racks. Repeat with any remaining
batter. Let cool completely.
4)
Beat cream cheese, butter, and sugar
in a small bowl until just smooth. Add milk and vanilla; beat frosting until
combined. Use immediately.
